Zar Mini RIB 18 DL PVC

Zar Formenti RIB 18 DL PVC

Our ZAR mini™ RIB line has different sizes and versions. All boats can be equipped with a bow locker (“L”) and a flat double flooring (“D”). All boats starting from RIB11 have a bow locker and from RIB 12 a double flooring and a bow locker as standard features. Below these sizes (RIB8,9 & 10) you can choose what you need.

The ZAR mini™ RIB line can easily pull water toys, waterski (from25hp) and tubes with the two installed D-rings on the transom.

Every ZAR mini™ has three lifting Davit lifting points. One in the bow and two on the transom. If your ZAR mini™ has a bow locker, you will have four lifting points.

Due to the very light aluminum hull it can go very fast and plan easily with a smaller engine. The hull will not face any problems of Osmoses or gel coat defects like a fiberglass hull. It will also last longer and not become heavier during use. The aluminum hull is being specially manufactured and powder coated to resist corrosion and saltwater. You will have a lot of fun with your ZAR mini™ RIB.

All RIB inflatables from ZAR mini™ until RIB14 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.050g/m2 and a thickness of 0.9mm.

All RIB inflatables from ZAR mini™ starting from RIB15 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.500g/m2 and a thickness of 1.2mm.

All ZAR miniTM RIB inflatables are also available in CSM (formally known as Hypalon™ from DuPont™) with a special design. Please ask your ZAR mini™ dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use Hypatex™ that is one on the best material on the world market today. It has been manufactured since 60 years.

• Deep V bottom

• Reinforced integral transom for outboard engine

• Splash guard on transom

• Self drainage plug

• Multi-chamber buoyancy tube

• Tough raised rubbing strake with splash guard

• Anchor bow nose with cleat

• 2 Bow lifting handle

• 2 Rear lifting handles

• Holding handles on tube

• Saftey valve

• Antislip pattern inside

• Bi color tube with deco

• Keelguard

• High efficiency foot pump

• Maintenance kit & User's manual

• Extra wide double flooring flat inside*

• Bow locker with anchor locker and fuel tank place 24l

• Welded PVC tube material*

• Extra Powdercoated aluminium hull - 200°C